Marine Outfitting Equipment | PT. Bestari Anugerah Jaya

July 19, 2016

Marine Grating

marine greating

Marine Grating

Marine Grating is widely used in all kinds of channels, such as machine furnace storehouse passageway of ship,deck walkway, warehouse platform, chimneys platform, bridge house platform, etc.Marine grating is specially tailored for shipbuilding industry.Different specifications can be available according to the needs of different users.

Hi-sea product design, production and acceptance strictly conform to CB/T608-1998 standard.At the same time, the selection of materials, processing technology of the marine steel grating, welding process, package edge flat steel and the specifications of the twisting lever, fixed plate welding and hot dip galvanized zinc layer thickness all also have strict requirements.

Base Materials of Marine Grating:

Q235A carbon steel, stainless steel (1cr18ni9ti stainless steel ordinary material) resin glass fiber reinforced plastic grille( FRP fiber reinforced composite plastics)

Materials of Marine Grating:

Plain type flat steel,I-bar type flat steel and FRP reinforced composite plastic

Surface treatment of marine grating:

General hot dip galvanized process is for carbon steel

Acid picking and polishing processing are for stainless steel.

The main particularity of selecting material,welding and galvanizing:

1.Raw material requirements: Good toughness of steel is one of the most critical requirements. In addition, high strength, good corrosion resistance and processing forming performance and surface quality are important. The requirements of the chemical composition Mn/C is above 2.5 for assuring quality and ensuring enough toughness.Flat steel type mainly has:25×5mm,32×3mm,40×3mm,50×5mm, etc.Wrapped edge flat steel specification shall be as wide as bearing flat steel and not less than 5 mm thickness of flat steel.The twisted square steel diameter of width direction must be Φ 8mm.The material must be carbon structural steel Q235A or 1cr18ni9ti stainless steel.

2.Welding processing requirements:Each bearing flat steel and package edge flat steel are two-side package fillet welding,the welding seam is not less than 3 mm;Each bearing flat steel and the joint of twisting rod are full welding; Must remove splash, welding slag, burr and grinding after After finishing black pieces production of the semi-finished products. The four angle has no sharp edges and the whole is flat.

3.The galvanized layer requirements of marine grille: When the thickness of the bearing flat steel is not less than 5 mm, the average zinc layer weight after galvanizing is not less than 610 g / ㎡;When the thickness of the bearing flat steel is less than 5 mm,the average zinc layer weight after galvanizing is not less than 460 g / ㎡.The quality requirements comply with the latest GB/T13912-2008 standard.

Marine grating is in accordance with these standards as follows:Chinese CCS standard, Germany GL standard, French BV standard, British LR standard, Norway DNV standard and so on.Different national standard and the user’s production needs are various.The standard strength structural steel set by the China classification society has four quality grades to distinguish general strength and high strength.

Specifications of Marine Grating: (for reference)

Form code	Name	Specifications of flat steel	Specifications of cross-bar	Flat steel pitch	Cross-bar pitch	Outline dimension	Application
AC	Carbon steel grating	323mm 403mm 50*5mm	6mm	40mm	100mm	5001000mm 6001000mm 7001000mm 8001000mm	machine furnace storehouse passageway,deck walkway,platform
AB	Stainless steel grating	323mm 403mm 50*5mm	6mm	40mm	100mm	5001000mm 6001000mm 7001000mm 8001000mm	machine furnace storehouse passageway,deck walkway,platform
BG	I-bar type steel grating	1538mm 2025mm	6mm	30mm 25mm	130mm	5001000mm 6001000mm 6901000mm 7801000mm	machine furnace storehouse passageway,deck walkway,platform

Form code	Name	Single grating size	Thickness	Width of up rib	Width of down rib	Outline dimension	Application
BF	FRP steel grating	38*38 mm	30 mm	6.5 mm	5 mm	5001000mm 6001000mm 7001000mm 8001000mm	machine furnace storehouse passageway,deck walkway,platform
		38*38 mm	25 mm	6.4 mm	5 mm
		40*40 mm	25 mm	6.5 mm	5mm

Note:Marine grating can be customized according to client’ special requirements.For any more information,please feel free to contact us directly.

July 4, 2016July 19, 2016

Marine Sanitary Unit

Marine Sanitary Unit

With many years of experience and specialized competence,Hi-sea can offer fully fitted wet units.Hi-sea modular wet units are ideal for marine accommodations,from cruise ships to offshore installations.The Hi-sea wet units,whether standard or custom made,are manufactured according to the very strict quality control and are fabricated from only first class materials.In our design the emphasis is on using durable solutions to ensure maximum quality,comfort and well-being of our customers,a ship owner,ship yard or end user.Throughout the production process the units are subjected to strict quality control to ensure that all of our supplies conform to our policy of supplying first class quality only.

Hi-sea unit can be delivered with different draining systems according to customers’ specifications.The floor pan is fully tested water tight,blasted and primed before application of finish.

Solution for heating cable and/or step

Standard solution for tiled floor

Hi-sea wet units are delivered with walls and ceilings manufactured in a sandwich construction with no open/visible insulation. Our marine sanitary unit conforms to the requirements of various Classification Societies,such as CCS,LR,GL,ABS,KR,DNV,NK,EC,etc.If you are interested in our products,please do not hesitate to contact us directly for any more information.

Standard Equipment and Accessories:

All accessories are fabricated from first class materials from well reputed suppliers.Of course,our prefabricated units can be designed and equipped according to specific requirements of and other maker or quality.

Wash-basin

Shower set,chrome

Operator,white

Shower battery,chrome

Cistern(Special made for ships)

Mixing battery,chrome

Toilet bowl

Door lock

Toilet cabinet,double/single door

Soap holder

Toilet cabinet,double door

Tumbler holder+glass

Ash tray

Spare paper holder

Toilet paper holder

Toilet brush holder

Light fitting IP44

Grab bar

Towel rail

Standard Modular Sanitary Units:

These units are for guidance only,we deliver units according to customer specification and design.

Typical standard details
Scupper	Steel w/grate of stainless steel
Outlet grey water	48mm
Fresh water pipe	Copper pipe,1.5mm,with isolating pvc cover
Connection	Ball valve,1/2²
EI,cable	3×1.5m㎡
Door hinges	2ea,stainless steel

Wet units can,upon request,be delivered in(knock down) execution.

July 4, 2016

Marine Three-tier Bed

Marine Three-tier Bed

This bed has three tiers.It is suitable to marine use,such as vessels,boats and ships.There are three drawers.Ladder and lock are available. Strong construction satisfies customers.Different designs are available as required.Various materials can be made,especially metals,such as SECC and powder coating steel.This is professional for ships.

For the further more information,please contact us directly.you can find the email address from our website.

Features:

Durable

Anti-rust

High quality design

Nice outlook

Color and size can be custom made

Three tiers,drawers and lock are available

With round tube,safe and comfortable